Smart Socket Configuration

You are here:
< Back

You can easily add a smart socket to Eye4Smart APP through the video tutorial.Have a good time!

Android user smart socket video tutorial

Apple user smart socket video tutorial

Three APP Download method options as below

1.Click to download :“Eye4Smart” App
2.Search “Eye4Smart”on App Store,smart phone application platform to download the APP.
3.Scan the below QR code to download the APP.

Account sign up

Select the “sign up” on Android/iOS client end, complete the sign up by inputting username and pass code.

Adding the device

Before you can use your WiFi Smart Socket, it must be setup using your Android/iOS device. Initial setup must be performed using your 2.4GHz Wi-Fi network(currently not support 5GHz Wi-Fi network). Plug the socket in to ensure its pairing mode (Slowly blinking in blue ligh). If no, please long press the power-switch button until LED fast blinking to enter pairing mode. Then follow the steps below one by one.

Step 1: Once connected to your Wi-Fi network, open the Eye4Smart app.  On the Home page, select the “+“ icon in the  socket section. There are two ways to add the device.

Option 1: scan to add

Tap the “Scan to add“ section at the bottom of the screen. Scan the QR code on the socket or on the QR code card, go to the second step.

Option 2: others

Select the “others”,then go to “smart socket” button. Follow the steps on screen to the second step.

Step 2:The connection operation steps of different mobile platforms are as follows:

App would go discovering automatically, name the device and click “Add it” to the following automatic networking pairing status. The smart socket would turn on the APP home page once binding successfully.

Manual connection

If pairing not automatically successful, the “Manual connection” button would pomp up, and you may click it to turn out phone WiFi setting page. Select the socket hot pot @SOCKET_XXXX, go back to APP to find “Add it” and click it.

Remark: In case binding failure,you will need to check the network, default te socket by long pressing the socket switch till fast blinking in blue,and then repeat the Connecting to the Eye4Smart App section.

Step 3: Once pairing successfully, go back to HOME page to test the socket.

Contact Us

sales7@eye4smart.com

+86 755 36600626